Connecting the breakout box
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Special tools:
- Ignition off.
- Remove the door panel
- Disconnect the module connectors.NOTE: Unplug the 12-pin connector before the 30-pin connector.
Connect the adapter to the control module's connector. Connect breakout box 9511428 and cable harness 9511499 to the adapter.
Adapter cable harness 9511507 is for the 12-pin connector, and adapter cable harness 9813194 is for the 30-pin connector.
Disconnection of breakout box in reverse order.
Other information
- To remove the door panel, see Replacing the front door side panel
- For further information about signals and other values, see Signal specification .