Connecting the breakout box
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Special tools:
- Ignition off
- Remove the door panel
- Disconnect the module connectors.NOTE: Disconnect the 12-pin connector before the 30-pin connector.
Connect the adapter to the control module connector. Connect breakout box 9511428 . Connect wiring 9511499 to the adapter.
Adapter wiring 9511507 is for the 12-pin connector. Adapter wiring 9813194 is for the 30-pin connector.
Disconnect the breakout box in reverse order.
Other information
- To remove the door panel, see Panel, front side door, replacing (-2003) or Panel front side door, replacing (2004-)
- For further information about signals and other values, see Signal specification .