Removing the adapter and connector
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
- Wait 3 minutes after turning off the ignition. The main relay must have released the voltage before the control module is removed from the vehicle. If the engine cooling fan runs after the ignition has been turned off, wait until it has stopped and then wait an additional 3 minutes.NOTE:
Do not touch engine control module (ECM) connecting pins with your fingers. Engine control module (ECM) components can be damaged by static electricity.
- Carefully detach the engine control module (ECM) from the adapter wiring harness.NOTE:
Do not touch engine control module (ECM) connecting pins with your fingers. Engine control module (ECM) components can be damaged by static electricity.
- Carefully detach the adapter from the vehicle wiring harness.
- Remove the cover plate from the air cleaner housing.