Checking cables
Check cables between
- control module #A57 and camshaft position (CMP) sensor #1
- control module #A58 and manifold absolute pressure (MAP) sensor #3
- control module #A58 and air conditioning (A/C) pressure sensor #3
- control module #B10 and fuel tank pressure sensor #3
for an intermittent short-circuit to ground according to Short-circuit to ground, intermittent faults .
Other information
- Connecting the breakout box/accessing the control module, see Connecting the breakout box .
- To access the control module, see Engine control module (ECM), replacing .
- To access/replace the camshaft position (CMP) sensor, see Replacing camshaft position sensor (CMP) .
- To access/replace manifold absolute pressure (MAP) sensor, see Mass air flow (MAF) sensor, replacing .
- To access/replace air conditioning (A/C) pressure sensor, see Replacing pressure switch /Pressostat .
- To access/replace the fuel tank pressure sensor see Fuel tank, replacing .
- For information about signals, see Signal specification .
- Continue
Refer to Information