Fault-tracing information, fault found:

The control module has detected leakage in the fuel tank system. This may be because the fault existed before the fault-tracing was begun or that the fault occurred during the fault tracing. The fault is not relevant for this diagnostic trouble code (DTC) test.
HINT: Check that the hoses, components etc have been correctly reinstalled. Check that they are not damaged.
Remedy as necessary.
Select a suitable alternative to continue:
1. Start this fault-tracing from the beginning again
  Refer to Checking other diagnostic trouble codes (DTCs), engine control module (ECM)
2. Fault trace for leakage in the fuel tank system
  Refer to Leakage
3. Finish fault-tracing.
  OKAY: Troubleshooting has been completed.