Checking The Components And Wiring: Notes
Check the canister valve's resistance.
Check the signal line between control module #B40 (#B50) and the canister valve, connection 2, for short-circuiting to voltage acc. to:Checking wiring and terminals. Permanent fault
HINT: Use an electrician's screwdriver with at least a 3 W bulb to determine whether there is a short-circuit to supply voltage in the cable.
Remedy as necessary.
Other information
- See: Connecting the breakout box
- To access/replace the canister valve, see: Replacing the shut-off valve for the carbon filter container
- See Component specifications
- For information about signals, see ELECTRICAL SYSTEM
- Continue
Refer to Verification