Checking the status

Fig 1: Engine Start Verification

GLL101037

Courtesy of VOLVO CARS OF NORTH AMERICA.

Start the engine.
Read off the fault status of the camshaft position (CMP) sensor. Check the status of the fault when the diagnostic status is COMPLETED. If the fault status is "NO FAULT FOUND" when the diagnostic status is COMPLETE there is an intermittent fault.

Fig 2: Identifying VCT2000 Diagnostic Tool
Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 3: Identifying Camshaft Position (CMP) Sensor
Courtesy of VOLVO CARS OF NORTH AMERICA.

Continue
Refer to Checking connectors and wiring