Diagnostic trouble code (DTC) information
Condition
The control module checks that no faults remain in the probe or the wiring. Diagnostic trouble code (DTC) ECM-2A0A is stored if the control module registers that the signal deviates from the permitted value range.
Substitute Value
- twin heated oxygen sensor (HO2S) control disabled
- Three-way catalytic converter (TWC) diagnostic disabled.
Possible Source
Signal too high:
- short-circuit to supply voltage in the signal cable
- short-circuit to supply voltage in ground lead
- defective heated oxygen sensor (HO2S)
Faulty signal:
- short-circuit to ground in the signal cable
- short-circuit to ground in the ground lead
- defective heated oxygen sensor (HO2S).
Signal missing:
- open-circuit in signal cable
- open-circuit in ground lead
- defective heated oxygen sensor (HO2S).
- contact resistance or oxidation in the connectors
Fault symptom[s]
- malfunction indicator lamp (MIL) lit.