Checking for open-circuits and short-circuits
Check that the fuses in the fusebox in the passenger compartment are intact.
Check the cable between control module terminal #21 and siren terminal #2. Check for a short-circuit to ground. Check for an open-circuit. Check for a short-circuit to supply voltage.
Check the wiring from the fuse in the passenger compartment to siren connector terminal #1. Check for an open-circuit. Check for a short-circuit to ground.
Other information:
- For further information about signals and other values, see Signal specification
- To connect the breakout box, see Connecting the breakout box
- To access the siren connector, see Siren, replacing
- For further information about the fuses and relays, see the appropriate Wiring Diagram
- See Checking wiring and terminals .
Remedy as necessary.
Was a fault detected?
- YES
Refer to Verification
- NO
Refer to Replacing the component