Signal too high/signal missing. Permanent fault: Verification: Verification

HINT: After the repair it is necessary to check that the fault has been rectified. 

Fig 1: Identifying Ignition Switch ON Position

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Connector(s) Reinstallation

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off.
• Connect the connectors, install the components, etc.
• Ignition on.

  Read front fog lamp relay.

  The value will change between activated and not activated if the front fog lamp switch is operated.

  Fig 3: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Does it work? 

• YES 

  VERIFIED:  Troubleshooting has been completed.

• NO 

  Refer to Information