Checking Locking Motor Wires
Check door control unit and lock unit connectors for contact resistance and oxidation as described in Contact resistance and oxidation .
Troubleshoot the wire between door control unit connector B2 and lock unit connector 8 for an open circuit as described in Open-circuit, permanent faults .
Troubleshoot the wire between door control unit connector B6 and lock unit connector 7 for an open circuit as described in Open-circuit, permanent faults .
Additional information
- To access/replace rear electronic module (REM), see Integrated relay/fusebox cargo compartment/Rear electronic module (REM), replacing .
Is there a fault?
- YES
OKAY: Troubleshooting has been completed.
- NO
Refer to Replacing Lock Unit