Checking the wiring
- Ignition off
- Disconnect central electronic module (CEM) connector D.
Check the signal cable. Check for an open-circuit. Check for a short-circuit to ground.
Take readings between central electronic module (CEM) terminal #D23 (#23) and gear selector module (GSM) terminal #3.
Remedy as necessary.
Other information
- See Connecting the breakout box
- See Signal specification
- See Location of components
- For M56 and M58 2001- see Gear selector lever assembly, replacing
- For M66 2005- see Gear selector lever assembly, replacing
- For AW55-50 and AWD50AWD 2001-, see Gear selector lever assembly, replacing
- For AW55-50 and AWD50AWD 2001- Geartronic, see Gear selector lever assembly Geartronic, replacing .
- For TF-80SC D5244TX 2006-, see Gear selector lever assembly, replacing .
- See Checking wiring and terminals
- Continue
Refer to Verification