Checking and replacing the component

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off
• Replace the relay for heating the leak diagnostic pump
• Ignition on.

  Activate the relay. The relay should click.

  If the function is OK, the cause of the fault was a defective relay (short-circuit in the relay).

  Other information 

  • To access and replace the relay, see Central electronic module (CEM), replacing
  • For further information about the fuses and relays, see the appropriate Wiring Diagram.
  Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Was the function OK? 

• YES 

  OKAY:  Troubleshooting has been completed.

• NO 

  Refer to Checking the control module