Locking And Unlocking Doors

The doors can be locked:

Using the key in the driver's door lock cylinder
Using the remote control LOCK button
Using the switches in the driver's door module and the passenger door module The function is disabled if the car is locked from outside or using the remote control. For single step locking all doors must be closed so that locking can be carried out using the switch. For two step unlocking with the ignition key removed all the doors lock at the same time using the switch even if a door is open.

NOTE:

If the ignition key is in the ignition switch the car cannot be locked using the remote control or using a key in the driver's door. If the ignition key is in the ignition switch and the driver's door is open and the button on the driver's door module is pressed then the doors lock and immediately unlock. These two functions prevent locking the key in the car.

The doors can be unlocked:

Using the key in the driver's door lock cylinder
Using the remote control UNLOCK button
Using the switches in the driver's door module and the passenger door module The function is disabled if the car is locked using a key or using the remote control
Via a request from the SRS (supplemental restraint system) control module in the event of a collision.