LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2007 >> S60 Base, AWD >> Repair and Diagnosis (Single Page) >> Restraints >> Passive Restraints >> Restraint Systems - General Diagnostics And Tests >> Connecting The Breakout Box, Supplemental Restraint System Module (SRS) (2005-2009) >> Connecting the Breakout Box >> General Information

General Information

CAUTION: Avoid touching control module connector pins and corresponding cable harness connectors. There is a risk of electrostatic discharge, which could damage the control module. Relieve any charge on yourself and the tools to be used by holding the metal part of the tool and touching part of the body just before starting work.

Visually check the connectors to ensure that the male and female terminals are not damaged and that the cables for the female halves are properly connected.

The breakout box is designed to facilitate reading off the control module input and output signals and the cable and component resistance when the control module is disconnected. The use of a breakout box reduces the risk of accidental short-circuited cables and damage to the connector pins.

scientia non olet · About LEMON Manuals