Checking wiring and connectors (4)

Check the ground lead between movement sensor connector terminal #5 and the ground terminal 31/83. Check for an open-circuit. Check for an intermittent open-circuit.

Check in particular intermediate connector (54/13:20) in the cable harness.

If no fault was found, try a new sensor.

Other information: 

• To connect the breakout box: Connecting the breakout box
• For information about upper electronic module (UEM) signals:Signal specification
• See Replacing the movement sensor
• See Checking wiring and terminals

Fig 1: 10 CD Changer Connector Terminals

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Connector Terminals

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Continue 

  Refer to Verification