Checking the generator (GEN)
- Ignition off
- Disconnect the 1-pin connector from the generator (GEN) (1B)
- Start the engine.
Check that the voltage does not exceed 16 volts at 2,000 RPM.
Remedy as necessary.
Other information:
- To access the central electronic module (CEM), see Central electronic module (CEM), replacing
- To connect the breakout box, see Connecting the breakout box
- The generator (GEN) connector for gasoline engines, see Generator, replacement
- The generator (GEN) connector for diesel engines, see Generator (GEN), replacing
- Continue
Refer to Information