Connecting The Breakout Box

Fig 1: Identifying Breakout Box

Courtesy of VOLVO CARS OF NORTH AMERICA.

Ignition off
Remove fuses 11C/21, 11C/25 and 11C/32 from the fusebox in the passenger compartment
Expose the central electronic module (CEM). See Central Electronic Module (CEM), Replacing .

Connect adapter 9511503 to the control module connector. Connect breakout box 9511428 to the adapter.

Disconnect the breakout box in reverse order.

NOTE:

Before the control module can be checked and measurements taken, the removed fuses must first be installed.

For further information about signals and other values, see Signal specification .

For further information about the fuses and relays, see appropriate wiring diagram.