Checking Input Signal

Read off the value for Hall sensor 1.

The value should not change when the seat is not affected.

HINT: If the value counts up or down there may be a fault in the sensor, an intermittent short-circuit to supply voltage or an internal fault in the power seat module (PSM). 

Remedy as necessary.

Other information: 

• To access Hall sensor 1, see Front-Rear Adjustment Motor .
• To connect the breakout box, see Connecting the Breakout Box, Power Seat Module (PSM) .
• For information on signals, refer to Signal Specification, Power Seat Module .

Fig 1: Breakout Box

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

Courtesy of VOLVO CARS OF NORTH AMERICA.