Signal missing: Verification
HINT: After carrying out the repair, check that the fault has been remedied.
- Ignition off
- Reinstall the connectors, components etc.
- Ignition on.
Activate the System test to test the DVD player. See System Test .
Check if the DVD player is OK or not. If the DVD player is functioning, OK is displayed.
HINT: Tell the customer that it may take 15 minutes of driving before the system is calibrated and functioning satisfactorily.
Is the DVD player OK?
- YES
OKAY: Troubleshooting has been completed.
- NO
The fault should have been detected and remedied. As this is not the case fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.