Checking Status

Fig 1: Identifying Ignition ON

GLL101051

Courtesy of VOLVO CARS OF NORTH AMERICA.

Ignition on.
Check the twilight sensor signal by varying the intensity of the light that it detects. Cover the twilight sensor with your hand to obtain the minimum signal, approximately 0.5 volts.

Then aim a strong light source (for example a flashlight) at the twilight sensor from close range to increase the signal.

HINT: If the signal from the twilight sensor indicates >4.75 volts, there is either an open-circuit in the cable or the twilight sensor is defective.

Click on the VCT2000 symbol to read off the light intensity (voltage).

NOTE:
The illustration only shows the method. The appearance of the twilight sensor can vary between different models.

Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA
Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 3: Identifying Sun Sensor
Courtesy of VOLVO CARS OF NORTH AMERICA.

Continue
Refer to CHECKING COMPONENT AND WIRING