Diagnostic Trouble Code (DTC) Information ECM-952F
Condition
The diagnostic trouble code (DTC) is stored if the engine control module (ECM), via the CAN network, receives a fault message from the central electronic module (CEM) indicating that the analog signal from the accelerator pedal (AP) position sensor is faulty or that there is a fault in the CAN communication. The diagnostic trouble code (DTC) can be diagnosed when the ignition is switched on.
Substitute Value
The accelerator pedal (AP) does not function when the brake pedal is pressed.
Possible Source
- Fault trace the central electronic module (CEM).
Fault symptom[s]
- Cruise control does not work at all
- Poor accelerator pedal (AP) response.