Engine Control Module (ECM) Diagnostic Trouble Codes - 9 Of 10 (544 Body)

• ECM-910C: Clutch Pedal Switch. Signal Too High (B5254T3; 2007)
  • Diagnostic Trouble Code (DTC) Information ECM-910C
  • Fault-Tracing
• ECM-910C: Clutch Pedal Switch. Signal Too High (B5254T7; 2008-2011)
  • Diagnostic Trouble Code (DTC) Information ECM-910C
  • Fault-Tracing
• ECM-910C: Clutch Pedal Sensor. Signal Too High (B5254T3; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information ECM-910C
  • Fault-Tracing Information
• ECM-910D: Clutch Pedal Switch. Signal Too Low (B5254T3; 2007)
  • Diagnostic Trouble Code (DTC) Information ECM-910D
  • Fault-Tracing
• ECM-910D: Clutch Pedal Switch. Signal Too Low (B5254T7; 2008-2011)
  • Diagnostic Trouble Code (DTC) Information ECM-910D
  • Fault-Tracing
• ECM-910D: Clutch Pedal Sensor. Signal Too Low (B5254T3; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information ECM-910D
  • Fault-Tracing Information
• ECM-9110: Clutch Pedal Position Sensor. Faulty Signal (B5254T3; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-9110
  • Fault-Tracing Information
• ECM-9110: Clutch Pedal Position Sensor. Faulty Signal (B5254T7; 2008-2011)
  • Diagnostic Trouble Code (DTC) Information ECM-9110
  • Fault-Tracing Information
• ECM-9117: Throttle Unit. Faulty Signal (B5254T3; 2004)
  • Diagnostic Trouble Code (DTC) Information ECM-9117
  • Faulty Signal
    • Fault-Tracing Information
      • Fault-Tracing Information
      • Checking The Component And Wiring
      • Adaptation Of The Throttle Unit
      • Checking The Fault Status
      • Replacing The Component
    • Verification
      • Verification
      • Verification, Continued
    • Information
      • Fault-Tracing Information
• ECM-911B: Clutch Pedal Sensor. Signal Missing (B5254T3; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-911B
  • Fault-Tracing Information
• ECM-911B: Clutch Pedal Sensor. Signal Missing (B5254T7; 2008-2011)
  • Diagnostic Trouble Code (DTC) Information ECM-911B
  • Fault-Tracing Information
• ECM-911C: Clutch Pedal Sensor. Signal Too High (B5254T3; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-911C
  • Fault-Tracing Information
• ECM-911C: Clutch Pedal Sensor. Signal Too High (B5254T7; 2008-2011)
  • Diagnostic Trouble Code (DTC) Information ECM-911C
  • Fault-Tracing Information
• ECM-911D: Clutch Pedal Sensor. Signal Too Low (B5254T3; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-911D
  • Fault-Tracing Information
• ECM-911D: Clutch Pedal Sensor. Signal Too Low (B5254T7; 2008-2011)
  • Diagnostic Trouble Code (DTC) Information ECM-911D
  • Fault-Tracing Information
• ECM-913C: Throttle Unit. Faulty Signal (B5254T3; 2004)
  • Diagnostic Trouble Code (DTC) Information ECM-913C
  • Faulty Signal
    • Fault-Tracing Information
      • Fault-Tracing Information
      • Checking The Diagnostic Trouble Codes (DTCS)
      • Checking The Status
      • Checking Connectors And Components
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-913F: Throttle Unit. Faulty Signal (B5254T3; 2004)
  • Diagnostic Trouble Code (DTC) Information ECM-913F
  • Faulty Signal
• ECM-914C: Throttle Unit. Faulty Signal (B5244S4; 2004-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-914C
  • Faulty Signal (2004, 2005, 2006, 2007)
    • Checking The Component And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
  • Faulty Signal (2008, 2009, 2010)
    • Checking The Component And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-914C: Throttle Unit. Faulty Signal (B5244S7; 2005-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-914C
  • Faulty Signal (2004, 2005, 2006, 2007)
  • Faulty Signal (2008, 2009, 2010)
• ECM-914C: Throttle Unit. Signal Too High (B5244S4; 2004-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-914C
  • Signal Too High (2004, 2005, 2006, 2007)
    • Checking The Component And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
  • Signal Too High (2008, 2009, 2010)
    • Checking The Component And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-914C: Throttle Unit. Signal Too High (B5244S7; 2005-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-914C
  • Signal Too High (2004, 2005, 2006, 2007)
  • Signal Too High (2008, 2009, 2010)
• ECM-914C: Throttle Unit. Signal Too Low (B5244S4; 2004-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-914C
  • Signal Too Low (2004, 2005, 2006, 2007)
    • Checking The Component And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
  • Signal Too Low (2008, 2009, 2010)
    • Checking The Component And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-914C: Throttle Unit. Signal Too Low (B5244S7; 2005-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-914C
  • Signal Too Low (2004, 2005, 2006, 2007)
  • Signal Too Low (2008, 2009, 2010)
• ECM-914F: Throttle Unit. Faulty Signal (B5254T3; 2004)
  • Diagnostic Trouble Code (DTC) Information ECM-914F
  • Faulty Signal
• ECM-9150: Throttle Unit, Potentiometer 1. Faulty Signal (B5254T3; 2004)
  • Diagnostic Trouble Code (DTC) Information ECM-9150
  • Faulty Signal
    • Fault-Tracing Information
      • Fault-Tracing Information
      • Checking The Component And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-9150: Throttle Unit, Potentiometer 1. Signal Too High (B5254T3; 2004)
  • Diagnostic Trouble Code (DTC) Information ECM-9150
  • Signal Too High
    • Fault-Tracing Information
      • Fault-Tracing Information
      • Checking The Component And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-9150: Throttle Unit, Potentiometer 1. Signal Too Low (B5254T3; 2004)
  • Diagnostic Trouble Code (DTC) Information ECM-9150
  • Signal Too Low
    • Fault-Tracing Information
      • Fault-Tracing Information
      • Checking The Component And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-9160: Throttle Unit, Potentiometer 2. Faulty Signal (B5254T3; 2004)
  • Diagnostic Trouble Code (DTC) Information ECM-9160
  • Faulty Signal
• ECM-9160: Throttle Unit, Potentiometer 2. Signal Too High (B5254T3; 2004)
  • Diagnostic Trouble Code (DTC) Information ECM-9160
  • Signal Too High
    • Fault-Tracing Information
      • Fault-Tracing Information
      • Checking The Component And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-9160: Throttle Unit, Potentiometer 2. Signal Too Low (B5254T3; 2004)
  • Diagnostic Trouble Code (DTC) Information ECM-9160
  • Signal Too Low
    • Fault-Tracing Information
      • Fault-Tracing Information
      • Checking The Component And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-9170: Throttle Unit. Faulty Signal (B5254T3; 2004)
  • Diagnostic Trouble Code (DTC) Information ECM-9170
  • Fault-Tracing Information
• ECM-918A: Engine Control Module (ECM). Internal Fault (B5254T3; 2004)
  • Diagnostic Trouble Code (DTC) Information ECM-918A
  • Internal Fault
• ECM-919A: Engine Control Module (ECM). Faulty Signal (B5254T3; 2004)
  • Diagnostic Trouble Code (DTC) Information ECM-919A
  • Faulty Signal
    • Fault-Tracing Information
      • Fault-Tracing Information
      • Checking The Fault Status
      • Checking The Component And Wiring
      • Adaptation Of The Throttle Unit
      • Verification
      • Programming The Engine Control Module (ECM)
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-91A7: Throttle Unit. Faulty Signal (B5254T3; 2004)
  • Diagnostic Trouble Code (DTC) Information ECM-91A7
  • Faulty Signal
    • Fault-Tracing Information
      • Fault-Tracing Information
      • Checking The Diagnostic Trouble Codes (DTCS)
      • Checking The Component And Wiring
    • Information
      • Fault-Tracing Information
• ECM-91AC: Throttle Unit. Current Too High (B5244S4; 2004-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-91AC
  • Current Too High (2004, 2005, 2006, 2007)
    • Checking The Component And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
  • Current Too High (2008, 2009, 2010)
    • Checking The Component And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-91AC: Throttle Unit. Current Too High (B5244S7; 2005-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-91AC
  • Current Too High (2004, 2005, 2006, 2007)
  • Current Too High (2008, 2009, 2010)
• ECM-91AC: Throttle Unit. Faulty Signal (B5244S4; 2004-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-91AC
  • Faulty Signal (2004, 2005, 2006, 2007)
    • Checking The Throttle Unit
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
  • Faulty Signal (2008, 2009, 2010)
    • Checking The Throttle Unit
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-91AC: Throttle Unit. Faulty Signal (B5244S7; 2005-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-91AC
  • Faulty Signal (2005, 2006, 2007)
  • Faulty Signal (2008, 2009, 2010)
• ECM-91AC: Throttle Unit. Throttle Jammed (B5244S4; 2004-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-91AC
  • Throttle Jammed (2004, 2005, 2006, 2007)
    • Checking The Throttle Unit
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
  • Throttle Jammed (2008, 2009, 2010)
    • Checking The Throttle Unit
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-91AC: Throttle Unit. Throttle Jammed (B5244S7; 2005-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-91AC
  • Throttle Jammed (2005, 2006, 2007)
  • Throttle Jammed (2008, 2009, 2010)
• ECM-91B7: Throttle Unit. Faulty Signal (B5254T3; 2004)
  • Diagnostic Trouble Code (DTC) Information ECM-91B7
  • Faulty Signal
• ECM-91C7: Throttle Unit. Faulty Signal (B5254T3; 2004)
  • Diagnostic Trouble Code (DTC) Information ECM-91C7
  • Faulty Signal
• ECM-9200: Cruise Control. Faulty Signal (B5244S4; 2004-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-9200
  • Fault-Tracing Information
    • Information
• ECM-9200: Cruise Control. Faulty Signal (B5244S7; 2005-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-9200
  • Fault-Tracing Information
• ECM-9200: Throttle Position (TP) Sensor. Faulty Signal (B5254T3; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-9200
  • Fault-Tracing Information
• ECM-9200: Throttle Position (TP) Sensor. Faulty Signal (B5254T7; 2008-2011)
  • Diagnostic Trouble Code (DTC) Information ECM-9200
  • Fault-Tracing Information
• ECM-9210: Electronic Throttle Unit, Potentiometer 1. Faulty Signal (B5254T3; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-9210
  • Faulty Signal
• ECM-9210: Electronic Throttle Unit, Potentiometer 1. Faulty Signal (B5254T7; 2008-2011)
  • Diagnostic Trouble Code (DTC) Information ECM-9210
  • Faulty Signal
• ECM-921C: Electronic Throttle Unit, Potentiometer 1. Signal Too High (B5254T3; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-921C
  • Signal Too High (2005)
  • Signal Too High (2006, 2007)
    • Fault-Tracing Information
      • Fault-Tracing Information
      • Checking The Component And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-921C: Electronic Throttle Unit, Potentiometer 1. Signal Too High (B5254T7; 2008-2011)
  • Diagnostic Trouble Code (DTC) Information ECM-921C
  • Signal Too High
• ECM-921D: Electronic Throttle Unit, Potentiometer 1. Signal Too Low (B5254T3; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-921D
  • Signal Too Low
• ECM-921D: Electronic Throttle Unit, Potentiometer 1. Signal Too Low (B5254T7; 2008-2011)
  • Diagnostic Trouble Code (DTC) Information ECM-921D
  • Signal Too Low
• ECM-9220: Electronic Throttle Unit, Potentiometer 2. Faulty Signal (B5254T3; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-9220
  • Faulty Signal
• ECM-9220: Electronic Throttle Unit, Potentiometer 2. Faulty Signal (B5254T7; 2008-2011)
  • Diagnostic Trouble Code (DTC) Information ECM-9220
  • Faulty Signal
• ECM-922C: Cruise Control. Communication Fault (B5244S4; 2004-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-922C
  • Fault-Tracing Information
• ECM-922C: Cruise Control. Communication Fault (B5244S7; 2005-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-922C
  • Fault-Tracing Information
• ECM-922C: Electronic Throttle Unit, Potentiometer 2. Signal Too High (B5254T3; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-922C
  • Signal Too High (2005)
  • Signal Too High (2006, 2007)
    • Fault-Tracing Information
      • Fault-Tracing Information
      • Checking The Component And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-922C: Electronic Throttle Unit, Potentiometer 2. Signal Too High (B5254T7; 2008-2011)
  • Diagnostic Trouble Code (DTC) Information ECM-922C
  • Signal Too High
• ECM-922D: Electronic Throttle Unit, Potentiometer 2. Signal Too Low (B5254T3; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-922D
  • Signal Too Low
• ECM-922D: Electronic Throttle Unit, Potentiometer 2. Signal Too Low (B5254T7; 2008-2011)
  • Diagnostic Trouble Code (DTC) Information ECM-922D
  • Signal Too Low
• ECM-9240: Engine Control Module (ECM). Faulty Signal (B5254T3; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-9240
  • Faulty Signal
    • Fault-Tracing Information
      • Fault-Tracing Information
      • Checking The Diagnostic Trouble Codes (DTCS)
      • Checking Components And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-9240: Engine Control Module (ECM). Faulty Signal (B5254T7; 2008-2011)
  • Diagnostic Trouble Code (DTC) Information ECM-9240
  • Faulty Signal
• ECM-925C: Electronic Throttle Unit. Signal Too High (B5254T3; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-925C
  • Signal Too High / Signal Too Low
    • Fault-Tracing Information
      • Fault-Tracing Information
      • Checking The Diagnostic Trouble Codes (DTCS)
      • Checking Components And Wiring
    • Information
      • Fault-Tracing Information
• ECM-925C: Electronic Throttle Unit. Signal Too High (B5254T7; 2008-2011)
  • Diagnostic Trouble Code (DTC) Information ECM-925C
  • Signal Too High / Signal Too Low
• ECM-925D: Electronic Throttle Unit. Signal Too Low (B5254T3; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-925D
  • Signal Too High / Signal Too Low
• ECM-925D: Electronic Throttle Unit. Signal Too Low (B5254T7; 2008-2011)
  • Diagnostic Trouble Code (DTC) Information ECM-925D
  • Signal Too High / Signal Too Low
• ECM-926C: Electronic Throttle Unit. Signal Too High (B5254T3; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-926C
  • Signal Too High / Signal Too Low
• ECM-926C: Electronic Throttle Unit. Signal Too High (B5254T7; 2008-2011)
  • Diagnostic Trouble Code (DTC) Information ECM-926C
  • Signal Too High / Signal Too Low
• ECM-926D: Electronic Throttle Unit. Signal Too Low (B5254T3; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-926D
  • Signal Too High / Signal Too Low
• ECM-926D: Electronic Throttle Unit. Signal Too Low (B5254T7; 2008-2011)
  • Diagnostic Trouble Code (DTC) Information ECM-926D
  • Signal Too High / Signal Too Low
• ECM-9270: Throttle Unit. Faulty Signal (B5254T3; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-9270
  • Faulty Signal
    • Fault-Tracing Information
      • Fault-Tracing Information
      • Checking The Diagnostic Trouble Codes (DTCS)
      • Checking Components And Wiring
    • Information
      • Fault-Tracing Information
• ECM-9270: Throttle Unit. Faulty Signal (B5254T7; 2008-2011)
  • Diagnostic Trouble Code (DTC) Information ECM-9270
  • Faulty Signal
• ECM-9280: Throttle Unit. Faulty Signal (B5254T3; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-9280
  • Faulty Signal
    • Fault-Tracing Information
      • Fault-Tracing Information
      • Checking Components And Wiring
      • Adaptation Of The Throttle Unit
      • Checking The Function
      • Replacing The Component
    • Verification
      • Verification
      • Verification, Continued
    • Information
      • Fault-Tracing Information
• ECM-9280: Throttle Unit. Faulty Signal (B5254T7; 2008-2011)
  • Diagnostic Trouble Code (DTC) Information ECM-9280
  • Faulty Signal
• ECM-928C: Control Module, Communication Problems. Faulty Signal (B5254T3; 2004)
  • Diagnostic Trouble Code (DTC) Information ECM-928C
  • Fault-Tracing Information
• ECM-929C: Engine Control Module (ECM). Signal Too High (B5254T3; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-929C
  • Signal Too High / Signal Too Low
    • Fault-Tracing Information
      • Fault-Tracing Information
      • Checking The Fault Status
      • Checking Components And Wiring
      • Adaptation Of The Throttle Unit
      • Verification
      • Programming The Engine Control Module (ECM)
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-929C: Engine Control Module (ECM). Signal Too High (B5254T7; 2008-2011)
  • Diagnostic Trouble Code (DTC) Information ECM-929C
  • Signal Too High / Signal Too Low
• ECM-929D: Engine Control Module (ECM). Signal Too Low (B5254T3; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-929D
  • Signal Too High / Signal Too Low
• ECM-929D: Engine Control Module (ECM). Signal Too Low (B5254T7; 2008-2011)
  • Diagnostic Trouble Code (DTC) Information ECM-929D
  • Signal Too High / Signal Too Low
• ECM-92B0: Electronic Throttle Unit. Faulty Signal (B5254T3; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-92B0
  • Faulty Signal
• ECM-92B0: Electronic Throttle Unit. Faulty Signal (B5254T7; 2008-2011)
  • Diagnostic Trouble Code (DTC) Information ECM-92B0
  • Faulty Signal
• ECM-92CC: Electronic Throttle Unit. Signal Too High (B5254T3; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-92CC
  • Signal Too High / Signal Too Low
    • Fault-Tracing Information
      • Fault-Tracing Information
      • Checking The Diagnostic Trouble Codes (DTCS)
      • Checking The Status
      • Checking Connectors And Components
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-92CC: Electronic Throttle Unit. Signal Too High (B5254T7; 2008-2011)
  • Diagnostic Trouble Code (DTC) Information ECM-92CC
  • Signal Too High / Signal Too Low
• ECM-92CD: Electronic Throttle Unit. Signal Too Low (B5254T3; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-92CD
  • Signal Too High / Signal Too Low
• ECM-92CD: Electronic Throttle Unit. Signal Too Low (B5254T7; 2008-2011)
  • Diagnostic Trouble Code (DTC) Information ECM-92CD
  • Signal Too High / Signal Too Low
• ECM-92D0: Electronic Throttle Unit. Faulty Signal (B5254T3; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-92D0
  • Faulty Signal
• ECM-92D0: Electronic Throttle Unit. Faulty Signal (B5254T7; 2008-2011)
  • Diagnostic Trouble Code (DTC) Information ECM-92D0
  • Faulty Signal
• ECM-92E0: Engine Control Module (ECM). Internal Fault (B5254T3; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-92E0
  • Internal Fault
• ECM-92E0: Engine Control Module (ECM). Internal Fault (B5254T7; 2008-2011)
  • Diagnostic Trouble Code (DTC) Information ECM-92E0
  • Internal Fault
• ECM-9300: Clutch Pedal Position Sensor. Faulty Signal (B5254T3; 2004)
  • Diagnostic Trouble Code (DTC) Information ECM-9300
  • Fault-Tracing Information
• ECM-9300: Control Module Communication Problems. Faulty Signal (B5254T3; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-9300
  • Fault-Tracing Information
• ECM-9300: Control Module Communication Problems. Faulty Signal (B5254T7; 2008-2011)
  • Diagnostic Trouble Code (DTC) Information ECM-9300
  • Fault-Tracing Information
• ECM-930B: Control Module Communication Problems. Signal Missing (B5254T3; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-930B
  • Fault-Tracing Information
• ECM-930B: Control Module Communication Problems. Signal Missing (B5254T7; 2008-2011)
  • Diagnostic Trouble Code (DTC) Information ECM-930B
  • Fault-Tracing Information
• ECM-930C: Clutch Pedal Sensor. Diagnostic Trouble Code (DTC) In The Central Electronic Module (CEM) (B5244S4; 2004-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-930C
  • Fault-Tracing Information
• ECM-930C: Clutch Pedal Sensor. Diagnostic Trouble Code (DTC) In The Central Electronic Module (CEM) (B5244S7; 2005-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-930C
  • Fault-Tracing Information
• ECM-930C: Control Module, Communication Problems. Signal Too High (B5254T3; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-930C
  • Fault-Tracing Information
• ECM-930C: Control Module, Communication Problems. Signal Too High (B5254T7; 2008-2011)
  • Diagnostic Trouble Code (DTC) Information ECM-930C
  • Fault-Tracing Information
• ECM-930D: Control Module Communication Problems. Signal Too Low (B5254T3; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-930D
  • Fault-Tracing Information
• ECM-930D: Control Module Communication Problems. Signal Too Low (B5254T7; 2008-2011)
  • Diagnostic Trouble Code (DTC) Information ECM-930D
  • Fault-Tracing Information
• ECM-930F: Clutch Pedal Sensor. Faulty Signal (B5254T3; 2004)
  • Diagnostic Trouble Code (DTC) Information ECM-930F
  • Fault-Tracing Information
• ECM-931C: Clutch Pedal Switch. Faulty Signal (B5244S4; B5244S7; 2007-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-931C
  • Fault-Tracing (2007)
    • Checking The Diagnostic Trouble Codes (DTCS)
    • Checking The Component, Wiring And Connectors
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
  • Fault-Tracing (2008, 2009, 2010)
    • Checking The Diagnostic Trouble Codes (DTCS)
    • Checking The Component, Wiring And Connectors
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-9400: Accelerator Pedal (AP) Position Sensor, Digital Signal. Faulty Signal (B5254T3; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-9400
  • Faulty Signal
    • Checking The Status
    • Checking The Power Supply
    • Checking The Connectors And Cables
    • Checking The Component And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-9400: Accelerator Pedal (AP) Position Sensor, Digital Signal. Faulty Signal (B5254T7; 2008-2011)
  • Diagnostic Trouble Code (DTC) Information ECM-9400
  • Faulty Signal
• ECM-9400: Brake Pedal Sensor. Faulty Signal (B5254T3; 2004)
  • Diagnostic Trouble Code (DTC) Information ECM-9400
  • Faulty Signal
• ECM-9400: Brake Pedal Sensor. Signal Missing (B5254T3; 2004)
  • Diagnostic Trouble Code (DTC) Information ECM-9400
  • Fault-Tracing Information
• ECM-940C: Brake Pedal Sensor. Signal Missing (B5244S4; B5244S7; 2007-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-940C
  • Fault-Tracing
    • Checking The Signal
• ECM-940C: Accelerator Pedal (AP) Position Sensor, Digital Signal. Signal Too High (B5254T3; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-940C
  • Signal Too High
    • Checking The Status
    • Checking The Power Supply
    • Checking The Connectors And Cables
    • Checking The Component And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-940C: Accelerator Pedal (AP) Position Sensor, Digital Signal. Signal Too High (B5254T7; 2008-2011)
  • Diagnostic Trouble Code (DTC) Information ECM-940C
  • Signal Too High
• ECM-940C: Brake Pedal Sensor. Faulty Signal (B5244S4; 2004-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-940C
  • Fault-Tracing Information
• ECM-940C: Brake Pedal Sensor. Faulty Signal (B5244S7; 2005-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-940C
  • Fault-Tracing Information
• ECM-940C: Brake Pedal Sensor. Signal Missing (B5244S4; 2004-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-940C
  • Fault-Tracing Information
• ECM-940C: Brake Pedal Sensor. Signal Missing (B5244S7; 2005-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-940C
  • Fault-Tracing Information
• ECM-940D: Accelerator Pedal (AP) Position Sensor, Digital Signal. Signal Too Low (B5254T3; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-940D
  • Signal Too Low
    • Checking The Status
    • Checking The Power Supply
    • Checking The Connectors And Cables
    • Checking The Component And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-940D: Accelerator Pedal (AP) Position Sensor, Digital Signal. Signal Too Low (B5254T7; 2008-2011)
  • Diagnostic Trouble Code (DTC) Information ECM-940D
  • Signal Too Low
• ECM-940F: Brake Pedal Sensor. Faulty Signal (B5254T3; 2004)
  • Diagnostic Trouble Code (DTC) Information ECM-940F
  • Fault-Tracing Information
• ECM-941C: Accelerator Pedal (AP) Position Sensor, Analog Signal. Signal Too High (B5254T3; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-941C
  • Fault-Tracing Information
• ECM-941C: Accelerator Pedal (AP) Position Sensor, Analog Signal. Signal Too High (B5254T7; 2008-2011)
  • Diagnostic Trouble Code (DTC) Information ECM-941C
  • Fault-Tracing Information
• ECM-941C: Stop Lamp Switch. Faulty Signal (B5244S4; 2004-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-941C
  • Faulty Signal (2004, 2005, 2006, 2007)
    • Checking The Status
    • Checking The Power Supply
    • Checking The Component And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
  • Faulty Signal (2008, 2009, 2010)
    • Checking The Status
    • Checking The Power Supply
    • Checking The Component And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-941C: Stop Lamp Switch. Faulty Signal (B5244S7; 2005-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-941C
  • Faulty Signal (2005, 2006, 2007)
  • Faulty Signal (2008, 2009, 2010)
• ECM-941D: Accelerator Pedal (AP) Position Sensor, Analog Signal. Signal Too Low (B5254T3; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-941D
  • Fault-Tracing Information
• ECM-941D: Accelerator Pedal (AP) Position Sensor, Analog Signal. Signal Too Low (B5254T7; 2008-2011)
  • Diagnostic Trouble Code (DTC) Information ECM-941D
  • Fault-Tracing Information
• ECM-9430: Accelerator Pedal (AP) Position Sensor, Analog Signal. Faulty Signal (B5254T3; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-9430
  • Fault-Tracing Information
• ECM-9430: Accelerator Pedal (AP) Position Sensor, Analog Signal. Faulty Signal (B5254T7; 2008-2011)
  • Diagnostic Trouble Code (DTC) Information ECM-9430
  • Fault-Tracing Information
• ECM-943B: Accelerator Pedal (AP) Position Sensor, Analog Signal. Signal Missing (B5254T3; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-943B
  • Fault-Tracing Information
• ECM-943B: Accelerator Pedal (AP) Position Sensor, Analog Signal. Signal Missing (B5254T7; 2008-2011)
  • Diagnostic Trouble Code (DTC) Information ECM-943B
  • Fault-Tracing Information
• ECM-943C: Accelerator Pedal (AP) Position Sensor, Analog Signal. Signal Too High (B5254T3; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-943C
  • Fault-Tracing Information
• ECM-943C: Accelerator Pedal (AP) Position Sensor, Analog Signal. Signal Too High (B5254T7; 2008-2011)
  • Diagnostic Trouble Code (DTC) Information ECM-943C
  • Fault-Tracing Information
• ECM-943D: Accelerator Pedal (AP) Position Sensor, Analog Signal. Signal Too Low (B5254T3; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-943D
  • Fault-Tracing Information
• ECM-943D: Accelerator Pedal (AP) Position Sensor, Analog Signal. Signal Too Low (B5254T7; 2008-2011)
  • Diagnostic Trouble Code (DTC) Information ECM-943D
  • Fault-Tracing Information
• ECM-950C: Engine Control Module (ECM), Idle Speed Control. Signal Too High (B5254T3; 2006-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-950C
  • Fault-Tracing
    • Checking The System
    • Information
      • Fault-Tracing Information
• ECM-950C: Engine Control Module (ECM), Idle Speed Control. Signal Too High (B5254T7; 2008-2011)
  • Diagnostic Trouble Code (DTC) Information ECM-950C
  • Fault-Tracing
• ECM-950C: Accelerator Pedal (AP) Position Sensor. Analog Signal Too High (B5244S4; 2004-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-950C
  • Fault-Tracing Information
• ECM-950C: Accelerator Pedal (AP) Position Sensor. Analog Signal Too High (B5244S7; 2005-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-950C
  • Fault-Tracing Information
• ECM-950C: Accelerator Pedal (AP) Position Sensor. Comparison Fault (B5244S4; 2004-2010)
  • Comparison Fault (2004, 2005, 2006, 2007)
    • Fault-Tracing Information
    • Checking The Status
    • Checking The Power Supply
    • Checking The Connectors And Cables
    • Checking The Component And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
  • Comparison Fault (2008, 2009, 2010)
    • Fault-Tracing Information
    • Checking The Status
    • Checking The Power Supply
    • Checking The Connectors And Cables
    • Checking The Component And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
  • Diagnostic Trouble Code (DTC) Information ECM-950C
• ECM-950C: Accelerator Pedal (AP) Position Sensor. Comparison Fault (B5244S7; 2005-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-950C
  • Comparison Fault (2005, 2006, 2007)
  • Comparison Fault (2008, 2009, 2010)
• ECM-950C: Accelerator Pedal (AP) Position Sensor. Faulty Pulse Width Modulation (PWM) Signal (B5244S4; 2004-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-950C
  • Faulty Pulse Width Modulation (PWM) Signal (2004, 2005, 2006, 2007)
    • Checking The Status
    • Checking The Power Supply
    • Checking The Connectors And Cables
    • Checking The Component And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
  • Faulty Pulse Width Modulation (PWM) Signal (2008, 2009, 2010)
    • Checking The Status
    • Checking The Power Supply
    • Checking The Connectors And Cables
    • Checking The Component And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-950C: Accelerator Pedal (AP) Position Sensor. Faulty Pulse Width Modulation (PWM) Signal (B5244S7; 2005-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-950C
  • Faulty Pulse Width Modulation (PWM) Signal (2005, 2006, 2007)
  • Faulty Pulse Width Modulation (PWM) Signal (2008, 2009, 2010)
• ECM-950C: Accelerator Pedal (AP) Position Sensor. Pulse Width Modulation (PWM) Signal Too High (B5244S4; 2004-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-950C
  • Pulse Width Modulation (PWM) Signal Too High (2004, 2005, 2006, 2007)
    • Checking The Status
    • Checking The Power Supply
    • Checking The Connectors And Cables
    • Checking The Component And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
  • Pulse Width Modulation (PWM) Signal Too High (2008, 2009, 2010)
    • Checking The Status
    • Checking The Power Supply
    • Checking The Connectors And Cables
    • Checking The Component And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-950C: Accelerator Pedal (AP) Position Sensor. Pulse Width Modulation (PWM) Signal Too High (B5244S7; 2005-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-950C
  • Pulse Width Modulation (PWM) Signal Too High (2005, 2006, 2007)
  • Pulse Width Modulation (PWM) Signal Too High (2008, 2009, 2010)
• ECM-950C: Accelerator Pedal (AP) Position Sensor. Pulse Width Modulation (PWM) Signal Too Low (B5244S4; 2004-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-950C
  • Pulse Width Modulation (PWM) Signal Too Low (2004, 2005, 2006, 2007)
    • Checking The Status
    • Checking The Power Supply
    • Checking The Connectors And Cables
    • Checking The Component And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
  • Pulse Width Modulation (PWM) Signal Too Low (2008, 2009, 2010)
    • Checking The Status
    • Checking The Power Supply
    • Checking The Connectors And Cables
    • Checking The Component And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information