Checking The Component And Wiring

Check the cable between engine control module (ECM) terminal #A69 (#B9) and pressure sensor terminal #1. Check for a short-circuit to ground.

Remedy as necessary.

Other information 

• see CONNECTING THE BREAKOUT BOX
• see SIGNAL SPECIFICATION (2008, 2009, 2010)
• see MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR
• see CHECKING WIRING AND TERMINALS
• see ENGINE CONTROL MODULE (ECM)

Fig 1: Identifying 3-Bit Connector

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 3: Identifying Manifold Absolute Pressure (MAP) Sensor Circuit

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Continue 

  Refer to VERIFICATION