Signal Too Low (2006, 2007): Verification: Verification
HINT: After carrying out the repair, check that the fault has been remedied.
- Ignition off
- Reinstall the connectors, components etc.
- Ignition on.
Read off the value from the boost pressure sensor and the atmospheric pressure sensor.
The signal from the atmospheric pressure sensor is used as a reference value in this test.
Check that the boost pressure sensor value is approximately the same as the atmospheric pressure sensor value.
Is the value correct?
- YES
VERIFIED: Troubleshooting has been completed.
- NO
VERIFICATION FAILED: The fault should have been detected and remedied. As this is not the case fault-tracing has failed. Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.