Checking The Connector

Check the connector and terminals for the mass air flow (MAF) sensor. Check for contact resistance. Check for oxidation.

Remedy as necessary.

Other information 

• see MASS AIR FLOW (MAF) SENSOR
• see CHECKING WIRING AND TERMINALS

Fig 1: Identifying Connector

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Ohm Meter

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 3: Identifying Intake Air Temperature (IAT) Sensor

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Continue 

  Refer to CHECKING THE INTAKE SYSTEM