Checking The Status

• Click on the VCT2000 (Volvo Scan Tool) symbol.
• Remove the key from the ignition switch.

  The status of the steering column lock must be changed to locked.

• Insert the key in the ignition switch.

  The status of the steering column lock must be changed to unlocked.

If read-out status is not okay or is invalid, the control module needs to be replaced.

Fig 1: Identifying VCT2000 (Volvo Scan Tool) Diagnostic Tool Symbol In VIDA

Courtesy of VOLVO CARS CORPORATION

Fig 2: Identifying Steering Column Lock

Courtesy of VOLVO CARS CORPORATION

Is the status OK? 

• YES 

  Refer to CHECKING THE POWER SUPPLY 

• NO 

  Refer to REPLACING THE STEERING COLUMN LOCK MODULE (SCL)