Diagnostic Trouble Code (DTC) Information ECM-9100

Condition 

Fig 1: Identifying Clutch Pedal Position Sensor

Courtesy of VOLVO CARS CORPORATION

If Central electronic module (CEM) receives an error message via CAN-net from Central electronic module (CEM) that indicates a faulty signal from the clutch pedal sensor or malfunction of CAN-communication, the diagnostic trouble code is generated.

The diagnostic trouble code (DTC) can be diagnosed when the ignition is switched on.

Substitute Value 

Cruise control switched off.

Possible Source 

• Fault-trace the central electronic module (CEM).

Fault symptom[s] 

• Cruise control does not function at all.