Checking The Status

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS CORPORATION

• Ignition on.

  Check the signal level from the clutch pedal sensor.

  Click on the VCT2000 (Volvo Scan Tool) symbol to read off the signal level.

  Slowly depress and release the clutch. Note a change in the signal level.

  The voltage level in the clutch pedal sensor must be between 0.15 and 4.75 volts.

  HINT: If the signal from the clutch pedal sensor indicates >4.75 volts, there is either an open-circuit in the cable or the clutch pedal sensor is defective. 

  Fig 2: Identifying VCT2000 (Volvo Scan Tool) Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS CORPORATION

Does the value change? 

• YES 

  Refer to VERIFICATION 

• NO 

  Refer to CHECKING THE COMPONENT AND WIRING