Signal Too High: Verification

HINT: After carrying out the repair, check that the fault has been remedied. 

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS CORPORATION

Fig 2: Checking Connector

Courtesy of VOLVO CARS CORPORATION

• Ignition off
• Reinstall the connectors, components etc.
• Ignition on.

  Read off the clutch pedal sensor. Click the VCT2000 (Volvo Scan Tool) symbol.

  Check that the value is between 0.15 and 4.75 volts.

  Fig 3: Identifying VCT2000 (Volvo Scan Tool) Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS CORPORATION

Is the value OK? 

• YES 

  VERIFIED:  Troubleshooting has been completed.

• NO 

  Refer to INFORMATION