LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2006 >> XC70 >> Repair and Diagnosis >> External Pages >> Different car >> Section 90 (Interior - Removal, Replacement And Installation) >> First Generation Power Seats (2001-2004) >> Power Seat Module (PSM), Replacing >> Removing the Control Module

Removing the Control Module

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2007 Volvo V70, 2006 Volvo V70, 2005 Volvo V70, 2004 Volvo V70, and 2003 Volvo V70. However, it is still accessible from the selected car via links, so may be relevant.

Raise the seat to its highest position.

Fig 1: Ignition In Off Position
GLL101073Courtesy of VOLVO CARS OF NORTH AMERICA.

For first generation power seats: 

Remove the seat from the car. See Front seats, replacing (version 1) .

For second generation power seats: 

Remove the seat from the car. See Removing power seats, tilting .

Fig 2: Ignition Key Off
GLL103058Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the key.

NOTE: The key must be removed to ensure that the ignition is not switched on by mistake.

Wait 1 minute before starting work. 

Remove the two screws.

Disconnect the connector.

Remove the control module.