Adjusting Front Toe Angle
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2007 Volvo V70, 2006 Volvo V70, 2005 Volvo V70, 2004 Volvo V70, and 2003 Volvo V70. However, it is still accessible from the selected car via links, so may be relevant.
Adjust with the tie rods after loosening the lock nuts. Adjusting towards a positive value will give toe-in and towards a negative value toe-out.
NOTE:
The lengths of the tie rods must not vary between themselves by more than 2mm. Measure between the lock nut and the edge of thread.
Tighten the lock nut, outer steering arm inner to steering arm inner. See: Tightening torque .
Treat the strut threads using rustproofing agent after tightening.