LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2006 >> XC70 >> Repair and Diagnosis >> External Pages >> Different car >> Section 44 (Engine, Fuel & Ignition Control Systems - Removal & Installation, Specifications) >> Ignition And Control Systems >> CAN Network >> General

CAN Network: General

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2007 Volvo V70, 2006 Volvo V70, 2005 Volvo V70, 2004 Volvo V70, and 2003 Volvo V70. However, it is still accessible from the selected car via links, so may be relevant.

Increasing demands for further functionality in the vehicle, both by statutory requirement and customers, have led to an increased complexity in the vehicle.

This, in turn, has encouraged developments towards more flexible electrical systems. The CAN-net (Controller Area Network) is a result of this research. The network permits the transmission and receipt of a large number of different commands and messages on the same wiring. Every command or message used to require a separate cable. Using networks has allowed functionality to be expanded without increasing the number of cables.

The number of commands and messages which can be handled on the network depends on factors such as the network speed and the length of the message or command. The Volvo network which is based on a control area network (CAN), can transmit over 500 different signals and approximately 100 messages. These messages are also called frames. Each message can contain several signals.