Signal specification
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2007 Volvo V70, 2006 Volvo V70, 2005 Volvo V70, 2004 Volvo V70, and 2003 Volvo V70. However, it is still accessible from the selected car via links, so may be relevant.
General
Ullow , voltage close to 0 V.
UIbat , battery voltage.
NOTE:
It is important to connect the breakout box and check the ground terminals before taking readings.
Connector A:
Connector A
| Control module terminal | Breakout box terminal | Signal type | Ignition on | Other |
| A1 | #1 | 30-supply (power supply from battery) | Ubat | - |
| A2 | #2 | Ix, index path (Speed adjustment screw) | Digital signal | - |
| A3 | #3 | B, reference path (Speed adjustment screw) | Digital signal | - |
| A4 | #4 | R1, sector (Speed adjusted screw) | Digital signal | - |
| A5 | #5 | A, reference path (Speed adjustment screw) | Digital signal | - |
| A6 | #6 | 15-supply (Speed adjustment screw) (power supply from ignition switch, positions I and II) | Ubat | - |
| A7 | #7 | LED current 2 (Speed adjustment screw) | 0-25 mA | Monitors signals R1, R2, R3 and R4 |
| A8 | #8 | Ground | Ulow | - |
| A9 | #9 | CAN H | Digital signal | - |
| A10 | #10 | CAN H | Digital signal | - |
| A11 | #11 | R3, sector (Speed adjusted screw) | Digital signal | - |
| A12 | #12 | LED current (Speed adjustment screw) | 0-25 mA | Monitors signals A, B, Ix and Iy |
| A13 | #13 | R2, sector (Speed adjusted screw) | Digital signal | - |
| A14 | #14 | Signal ground from Speed adjustment screw | Ulow | - |
| A15 | #15 | Horn | Ubat | Short-circuited to ground on activation |
| A16 | #16 | ground (battery) | Ulow | - |
| A17 | #17 | Iy, index path (Speed adjustment screw) | Digital signal | - |
| A18 | #18 | R4, sector (Speed adjusted screw) | Digital signal | - |
| A19 | #19 | CAN L | Digital signal | - |
| A20 | #20 | CAN L | Digital signal | - |
| A21 | #21 | Wiper out | Digital signal | - |
| A22 | #22 | ground (battery) | Ulow | - |
Connector B:
Connector B (To cruise control switch)
| Control module terminal | Breakout box terminal | Signal type | Ignition on | Other |
| B1 | #26 | Synchronizing signal | Synchronizing signal which starts from 12V | - |
| B2 | #27 | Power supply | 5 V | - |
| B3 | #28 | Signal ground | Ulow | - |
| B4 | #29 | - | - | - |
| B5 | #30 | - | - | - |