LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2006 >> XC70 >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Media, Communication And Navigation - Specifications, Electrical/Electronic) >> Signal Specification, Audio Control Module, Road Traffic Information (RTI) (2001-2007) >> Signal Specification, RTI >> RTI Control Module (To TV Receiver)

RTI Control Module (To TV Receiver)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2007 Volvo V70, 2006 Volvo V70, 2005 Volvo V70, 2004 Volvo V70, and 2003 Volvo V70. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: M2D Control Module (Fortv Executive. Rear Seat Entertainment, Generation 3.1/3.2, Premier TV Receiver) Connector
GLL104056Courtesy of VOLVO CARS OF NORTH AMERICA.

Before taking any readings, see Connecting the breakout box and checking the ground terminal .

The RTI control module terminals B1-B14 correspond to terminals #43-#56 on the breakout box.

Control module terminal  Breakout box terminal Signal Type  Ignition On  Other 
B1 #43 Video signal, TV Analog signal 1 V p-p +/- 0.2 V
B2 #44 Synchronizing signal, TV Digital signal 0-5 V
B3 #45 - - -
B4 #46 - - -
B5 #47 - - -
B6 #48 30 supply Ubat -
B7 #49 Signal ground, TV signals Ulow -
B8 #50 Screen ground, TV signals Ulow -
B9 #51 - - -
B10 #52 - - -
B11 #53 Signal, remote control TV Digital signal 33.3 kHz carrier wave when the remote control is pressed
B12 #54 - - -
B13 #55 Ground (Measured to battery negative terminal) Ulow -
B14 #56 - - -


Fig 1: RTI Control Module (To TV Receiver) Connector Terminals
GLL104161Courtesy of VOLVO CARS OF NORTH AMERICA.

Before taking any readings, see Connecting the breakout box and checking the ground terminal .

The RTI control module terminals F1-F13 correspond to terminals #1-#13 on the breakout box.

Control module terminal  Breakout box terminal Signal Type  Ignition On  Other 
F1 #1 Signal ground Ulow -
F2 #2 Left audio channel Alternating current when there is sound to the loudspeaker 150 mV rms +/- 38 mV
(1 kHz 30% mod)
F3 #3 - - -
F4 #4 Right audio channel Alternating current when there is sound to the loudspeaker 150 mV rms +/- 38 mV
(1 kHz 30% mod)
F5 #5 - - -
F6 #6 Voice guide channel Alternating current when there is sound to the loudspeaker (during voice guidance) 150 mV rms +/- 38 mV
(1 kHz 30% mod)
F7 #7 - - -
F8 #8 - - -
F9 #9 - - -
F10 #10 15 supply Ubat -
F11 #11 Busy signal to TV receiver Digital signal Melbus protocol
F12 #12 Clock signal to TV receiver Digital signal Melbus protocol
F13 #13 Data signal to TV receiver Digital signal Melbus protocol
H Screen ground, cable to TV receiver Ulow - -