Signal too low: Verification: Verification

HINT: After carrying out the repair, check that the fault has been remedied. 

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Connecting Connector

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off
• Reinstall the connectors, components etc.
• Ignition on.

  Check the signal from position sensor by clicking on the VCT2000 symbol. The voltage should be between 1.7-3.2V depending on loading and inclination. Check that road surface illumination is normal.

  Fig 3: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Is the voltage and road surface illumination OK? 

• YES 

  VERIFIED:  Troubleshooting has been completed.

• NO 

  Refer to Information