Transmission - Gear Selector, Lubrication

• Power transmission
  • Oil cooler, flush cleaning
    • Notes
    • Preparations
    • Connecting components to the vacuum extractor
    • Detaching and installing the upper oil hose and pipe
    • Flushing
    • Removing and installing the existing oil hoses
  • Oil grade, checking
    • Notes
    • Oil grade, checking (AW50/51 AWD; AW55-50/51SN; 2003-2007)
      • Check the oil
    • Oil grade, checking (B5254T4, TF-80SC AWD; 2006-2007)
      • Check the fluid
    • Oil grade, checking (TF-80SC and TF-80SCAWD D5244TX 2006-)
      • Check the fluid
  • Oil level, checking
    • Oil level, checking (B5234T3, AW55-50/51SN; 2001-2004)
      • Preparatory work
        • Removing the lower engine cover
        • Removing air filter housing
        • Before filling
        • Installing the air cleaner (ACL)
      • Check
        • Basic fluid level check
      • Finishing
        • Installing the filler plug
        • Installing the air cleaner (ACL)
        • Checking the oil level
        • Installing the lower engine cover
    • Oil level, checking (B5254T4, TF-80SC AWD; 2006-2007)
      • Preparatory work
        • Removing the lower engine cover
        • Before filling
        • Installing the air cleaner (ACL)
      • Check
        • Basic fluid level check
      • Finishing
        • Installing the filler plug
        • Installing the air cleaner (ACL)
        • Checking the oil level
        • Installing the lower engine cover
    • Oil level, checking (AW50/51 AWD; AW55-50/51SN; 2001-2007)
      • Notes
      • Conditions
      • Preparing to check the oil level
      • Move the gear selector through all positions. Wait in each position for approximately 3 seconds
      • Low level (topping up)
        • Top up with oil through the dipstick pipe
      • High level (overfilling)
        • Notes
        • Drain off oil
    • Oil level, checking (4T65AWD)
      • Notes
      • Checking the oil level
      • Oil level / temperature
    • Oil level, checking (AW50-42)
      • Notes
      • Conditions
        • Conditions
        • Preparing to check the oil level
        • Move the gear selector through all positions. Wait in each position for approximately 3 seconds
      • Low level (topping up)
        • Top up with oil through the dipstick pipe
      • High level (overfilling)
        • Notes
        • Drain off oil
  • Oil pump active on demand coupling (AOC), replacing
  • Particle filter, replacing
    • Notes
    • Removal
      • Removing the particle filter
    • Installation
      • Notes
      • Installing the particle filter
    • Finishing
      • Function test
  • Pen holder, replacing
    • Removing the pen holder
    • Installing the pen holder
  • Pinion seal bevel gear, replacing (AWD)
  • Pinion seal bevel gear, replacing
    • Notes
    • Removal
      • Removing the three-way catalytic converter (TWC)
      • Marking the propeller shaft and flange
      • Removing the propeller shaft
      • Removing the nuts for the bevel gear flange
      • Removing the flange
      • Removing the pinion seal
    • Installation
      • Notes
      • Installing the seal
      • Installing the flange on the pinion
      • Installing the propeller shaft
      • Installing the three-way catalytic converter (TWC)
      • Checking the oil level in the bevel gear
  • Power steering pump, replacing and bleeding
    • Notes
    • Removal
    • Installation
    • Power steering system, bleeding
      • Notes
      • Bleeding
  • Pressure pipe/hose, steering gear, replacing
    • Notes
    • Removal
      • Preparatory work
      • Removing the sub-frame
      • Removing the delivery lines
    • Installation
      • Notes
      • Installing the supply pipe / hose
      • Installing the sub-frame
      • Installing delivery lines
      • Finishing
  • Pressure plate/clutch driven plate, replacing (B5234T3; 2001-2004)
    • Notes
    • Removal
      • Blocking the flywheel
      • Aligning the counterhold for automatic clutch adjustment
      • Installing the compression tool
      • Relieving the load from the clutch diaphragm spring
      • Checking the clutch
      • Checking the pressure plate for out-of-true
      • Checking the clutch driven plate
      • Checking that there are no cracks or large scratches on the flywheel
    • Installation
      • Installing the centering tool for the clutch driven plate
      • Installing the clutch driven plate
      • Installing the tools on the clutch
      • Installing the clutch
      • Removing the tools
  • Pressure plate/clutch driven plate, replacing (diesel engines)
    • Notes
    • Removal
      • Blocking the flywheel
      • Aligning the counterhold for automatic clutch adjustment
      • Installing the compression tool
      • Relieving the load from the clutch diaphragm spring
      • Checking the clutch
      • Checking the pressure plate for out-of-true
      • Checking the clutch driven plate
      • Checking that there are no cracks or large scratches on the flywheel
    • Installation
      • Installing the centering tool for the clutch driven plate
      • Installing the clutch driven plate
      • Installing the tools on the clutch
      • Installing the clutch
      • Removing the tools
  • Pressure plate/clutch driven plate, replacing (gasoline engines)
    • Notes
    • Removal
      • Preparatory work
      • Blocking the flywheel
      • Installing the counterhold
      • Installing compression tool
      • Checking the clutch
      • Checking the pressure plate for out-of-true
      • Checking the clutch driven plate
      • Checking the flywheel
    • Installation
      • Notes
      • Installing the centering tool for the clutch driven plate
      • Installing the clutch driven plate
      • Installing the compression tool on a removed clutch
      • Installing the clutch
      • Removing tools
  • Pressure regulator, checking/adjusting
    • Check boost pressure
      • Preparation
      • Checking hoses
      • Checking the boost pressure
      • Checking the turbocharger (TC) function with the control system disengaged
      • Verification
  • Printed circuit board gear selector assembly/top panel, replacing (AW50/51 AWD; AW55-50/51SN; 2003-2007)
  • Printed circuit board gear selector assembly/top panel, replacing (B5254T4, TF-80SC AWD; 2006-2007)
    • Removal
      • Removing the gear selector knob
      • Removing the top panel from the gear selector assembly
      • Removing the gear selector assembly stop
      • Removing the small printed circuit board from the gear selector assembly stop
    • Installation
      • Installing the small printed circuit board on the holder and gear selector assembly stop
      • Installing the gear selector assembly stop
      • Installing the top panel on the gear selector assembly
      • Installing the gear selector knob
      • Checking the shift positions
  • Transmission, lubrication
    • Transmission, manual
    • Transmission, automatic
    • Other
    • Constant velocity joint boot, grease quantity