Checking connector

Fig 1: Identifying Ignition On Position

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Connectors

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off
• Check wiring and connectors for contact resistance and oxidation according to Contact resistance and oxidation .
• Reinstall components, reconnect connectors etc.
• Ignition on.
• Read off outside temperature.

  If the temperature is now within its permitted range, the fault was caused by loose connections in the connector.

  Other information 

  • To access/replace the outside temperature sensor see Outside temperature sensor door mirror, replacing .
  Fig 3: Identifying Connector Terminals

  Courtesy of VOLVO CARS OF NORTH AMERICA.
  Fig 4: Identifying VCT2000

  Courtesy of VOLVO CARS OF NORTH AMERICA.
  Fig 5: Identifying Outside Temperature Sensor

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Is the temperature within its permitted range? 

• YES 

  OKAY:  Troubleshooting has been completed.

• NO 

  Refer to Checking wiring and components