Panel Repair - Removal, Replacement And Installation
- Removal Work For Panel Repairs (2001-2003)
- Removal Work For Panel Repairs (2004-2009)
- Front section, exposing
- Preparations
- Front fender liner
- Front sill trim
- Front end
- Spring struts, front, replacing
- Oil cooler steering gear, replacing
- Casing, front bumper, replacing
- Engine/transmission, removing (D5252T)
- Engine/transmission, installing (D5252T)
- Transmission, installing
- Notes
- Checking before installing
- Adjust the position of the engine / transmission
- Install and tighten the screws for the transmission
- Install the torque converter screws
- Install the sub-frame components
- Lift up the engine and transmission to the horizontal position
- Install the rear engine mounting
- Install the sub-frame on the bodywork
- Install the left drive shaft on the transmission, the wheel spindle and the control arm
- Install the right drive shaft in the transmission, the wheel spindle and the control arm
- Install and tighten the sub-frame screws
- Install the oil pipe on the transmission
- Install and tighten the suspension components (both sides)
- Tighten the ball joint pinion
- Install new lock nuts on the steering gear
- Tighten the screw for the rear engine pad
- Reinstall the exhaust pipe
- Install the exhaust pipe on the turbocharger (TC)
- Install the screws for the bracket for the heated oxygen sensor (HO2S) cable
- Reinstall the front cross member
- Install the screw for the front engine pad and the torque rod mounting in the sub-frame
- Install the screw for the ground lead and the cable conduit
- Lower the car. Remove the lifting beam from the engine
- Install the remaining screws for the transmission and starter motor
- Install the dip stick pipe and the ground lead on the transmission
- Install the transmission cable on the transmission and the lever
- Install the charge air pipe on the charge air cooler (CAC). Connect the upper oil hose to the oil cooler
- Install the air cleaner (ACL) and the upper torque rod in the engine compartment
- Finishing work
- Resetting the adaptation
- Test drive form, description
- Oil level, checking
- Fuel system, quick-release connectors
- Draining/filling with coolant
- Replacing the engine cooling fan (FC)
- Rear section, exposing
- Roof section, exposing
- Side section, exposing
- Front section, exposing