Signal too low. Permanent fault: Verification: Verification

HINT: After carrying out the repair, check that the fault has been remedied. 

Fig 1: Engine Start Verification

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Connector(s) Reinstallation

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Start the engine.

  Read off the fault status of the camshaft position (CMP) sensor.

  When the camshaft position (CMP) sensor is tested, diagnostic ready should be displayed.

  Fig 3: Identifying VCT2000 Diagnostic Tool

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Does the status display fault found? 

• YES 

  Refer to Information 

• NO 

  VERIFIED:  Troubleshooting has been completed.