Description Of Parameters

The Following Parameters Can Be Read Off: 

• The status of the front left window up-control
• The status of the front left window down-control
• The status of the front left window auto-control
• The status of the front right window up-control
• The status of the front right window down-control
• The status of the front right window auto-control
• The status of the rear left window up-control
• The status of the rear left window down-control
• The status of the rear right window up-control
• The status of the rear right window down-control
• The status of the child safety button
  NOTE: A diagnostic trouble code (DTC) is stored if the child safety button is activated for 10 seconds.
• The status for the selection of the control for the left door mirror
• The status for the selection of the control for the right door mirror
• The status of the upward control for the door mirror
• The status of the downward control for the door mirror
• The status of the control for the left door mirror
• The status of the control for the right door mirror
• The status of the up-motor for the power window
• The status of the down-motor for the power window
• Lock cable M1, status
• Lock cable M2, status
• Lock cable M3, status
• Door open warning lamp, status (does not apply to all vehicles)
• Defroster, status
• Door mirror lamp, status
• Outside temperature, value
  NOTE: The outside temperature can only be read off from the control module on the right-hand side of the car.
• Power supply, value
• Signal supply, value
• Door mirror position X axis, value (does not apply to all vehicles)
• Door mirror position Y axis, value (does not apply to all vehicles).