Communication Fault: Verification: Verification

HINT: After carrying out the repair, check that the fault has been remedied. 

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS CORPORATION

Fig 2: Identifying Connector(s) Reinstallation

Courtesy of VOLVO CARS CORPORATION

• Switch off the ignition. Wait at least 15 seconds
• Reinstall the connectors, components etc.
• Ignition on for at least 5 seconds
• Move the gear selector lever to back-up (reversing) (R).

  The parking assistance module (PAM) is activated by pressing the switch on the lower section of the climate control module (CCM). Use the VCT2000 (or appropriate scan tool) to read off the diagnostic status from the parking assistance module (PAM).

  Check that the parking assistance module (PAM) is active. Check that the sensors are OK.

  Fig 3: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS CORPORATION

Is the parking assistance module (PAM) active? Are the sensors OK? 

• YES 

  VERIFIED:  Troubleshooting has been completed.

• NO 

  Refer to INFORMATION