Checking And Replacing The Component

Remove relay 2/119 and check the relay socket's contacts for contact resistance and oxidation. See CHECKING WIRING AND TERMINALS. PERMANENT FAULT

Install the relay.

Activate the relay using the button on the control panel on the right rear door, window down.

If the function is now OK the fault was caused by a contact fault in the relay base.

Other information 

• For -2004, see: CENTRAL ELECTRONIC MODULE (CEM), REPLACING
• For 2005-, see: CENTRAL ELECTRONIC MODULE (CEM), REPLACING .

Fig 1: Identifying Relays

Courtesy of VOLVO CARS CORPORATION

Was the function OK? 

• YES 

  Refer to VERIFICATION 

• NO 

  Refer to REPLACING THE COMPONENT