Installing the control module

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2007 Volvo V70, 2006 Volvo V70, 2005 Volvo V70, 2004 Volvo V70, and 2003 Volvo V70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Engine Control Module Installation

Courtesy of VOLVO CARS OF NORTH AMERICA.

Check that no pins or sockets are damaged on the connector.
Gently press the control module down into the grooves inside the control module box. Press to the limit position.
Insert tool 9995722 around the control module.
Move the upper section of the tool forwards as far as it will go. Pull the tool up.
Press the cover over the control modules.
Check that the air ducts are correctly positioned.