Checking diagnostic trouble codes (DTCs) (continued)

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Connecting Connector

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off
• Reconnect the components, connectors etc.
• Test drive the car. See Test Drive Form (DSTC (dynamic stability and traction control) /brake control module), description
• Ignition on
• Read off diagnostic trouble codes (DTCs).

  The brake control module (BCM) is faulty if the status of the diagnostic trouble code (DTC) is still permanent.

  Install the old active yaw control sensor and replace the control module

  Other information 

  • To replace the control module, see Brake control module (BCM), replacing .

Is the status of the diagnostic trouble code (DTC) permanent? 

• YES 

  OKAY:  Troubleshooting has been completed.

• NO 

  Refer to Information