Connecting Cable

WARNING: This page is about a different variant/trim than selected.

Turn ignition to position II. Reconnect negative battery cable. Enter code into stereo and reset clock. Check that the SRS warning light on the dashboard goes out.

Initialize the Upper Electronic Module (UEM). Initialize the central locking, interior lighting and sun roof by unlocking the car using a remote control, key or VADIS vehicle communication.

Calibrate the blower fan. If the car is equipped with manual or standard climate control, the blower fan speed must recalibrated if the battery has been disconnected. Turn ignition on. Turn the blower fan switch to maximum. Turn the blower fan switch to minimum. The calibration is complete.

Calibrate the sun roof. The sun roof must be closed. Press the sun roof switch so that the sun roof is in the tilt position. Release the switch. Press the button again for at least five seconds. Release the switch. The calibration is complete.