Checking wiring

Check the DSA control module and engine control module (ECM) connectors for contact resistance and oxidation according to Contact resistance and oxidation .

Check in particular for damaged or loose terminal pins.

Check the signal cable between the engine control module (ECM) terminal #20 and DSA control module terminal 15 for an intermittent open-circuit and remedy according to Open-circuit, intermittent faults .

Fig 1: Identifying DSA Control Module Terminals

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Ohmmeter

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 3: Identifying EMS2000

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Continue 

  Refer to Information