OBD II-codes
| OBD II-codes | Fault message | Volvo on-board diagnostic (OBD) system diagnostic trouble code (DTC) |
|---|---|---|
| P0013 | Camshaft reset valve, Signal too high | ECM-5D |
| P0013 | Camshaft reset valve, Signal too low | ECM-5D |
| P0013 | Camshaft reset valve, No signal | ECM-5D |
| P0014 | Camshaft reset valve, Incorrect signal | ECM-5E* |
| P0014 | Camshaft reset valve, Incorrect signal | ECM-5F* |
| P0014 | Camshaft reset valve, Incorrect signal | ECM-60* |
| P0015 | Camshaft reset valve, Incorrect signal | ECM-61* |
| P0030 | Front heated oxygen sensor (HO2S) preheating, No signal | ECM-18 |
| P0031 | Front heated oxygen sensor (HO2S) preheating, Signal too low | ECM-18 |
| P0032 | Front heated oxygen sensor (HO2S) preheating, Signal too high | ECM-18 |
| P0036 | Rear heated oxygen sensor (HO2S) preheating, No signal | ECM-1C |
| P0037 | Rear heated oxygen sensor (HO2S) preheating, Signal too low | ECM-1C |
| P0038 | Rear heated oxygen sensor (HO2S) preheating, Signal too high | ECM-1C |
| P0101 | Mass air flow (MAF) sensor, Faulty signal | ECM-14* |
| P0102 | Mass air flow (MAF) sensor signal, Signal too low | ECM-13* |
| P0103 | Mass air flow (MAF) sensor signal, Signal too high | ECM-13* |
| P0107 | Boost pressure sensor, Signal too low | ECM-0C* |
| P0107 | Boost pressure sensor, Signal too low | ECM-0D* |
| P0108 | Boost pressure sensor, Signal too high | ECM-0C* |
| P0108 | Boost pressure sensor, Signal too high | ECM-0D* |
| P0112 | Intake air temperature (IAT) sensor, Signal too low | ECM-0F* |
| P0113 | Intake air temperature (IAT) sensor, Signal too high | ECM-0F* |
| P0114 | Intake air temperature (IAT) sensor, Faulty signal | ECM-10* |
| P0115 | Engine coolant temperature (ECT) sensor, Faulty signal | ECM-A1* |
| P0117 | Engine coolant temperature (ECT) sensor, Signal too low | ECM-15* |
| P0118 | Engine coolant temperature (ECT) sensor, Signal too high | ECM-15* |
| P0119 | Engine coolant temperature (ECT) sensor, Faulty signal | ECM-A0* |
| P0121 | Throttle position (TP) sensor signal, Faulty signal | ECM-74 |
| P0122 | Throttle position (TP) sensor signal, Signal too low | ECM-73 |
| P0123 | Throttle position (TP) sensor signal, Signal too high | ECM-73 |
| P0125 | Engine coolant temperature (ECT) sensor, Faulty signal | ECM-A2 |
| P0128 | Engine coolant temperature (ECT) sensor, Faulty signal | ECM-A1* |
| P0130 | Front heated oxygen sensor (HO2S) signal, No signal | ECM-16 |
| P0131 | Front heated oxygen sensor (HO2S) signal, Signal too low | ECM-16 |
| P0132 | Front heated oxygen sensor (HO2S) signal, Signal too high | ECM-16 |
| P0133 | Front heated oxygen sensor (HO2S) short-term fuel trim, Faulty signal | ECM-28* |
| P0135 | Front heated oxygen sensor (HO2S) preheating, Faulty signal | ECM-18 |
| P0138 | Rear heated oxygen sensor (HO2S) signal, Signal too high | ECM-1A |
| P0139 | Rear heated oxygen sensor (HO2S), Faulty signal | ECM-29* |
| P0140 | Rear heated oxygen sensor (HO2S) signal, Signal too low | ECM-1A* |
| P0140 | Rear heated oxygen sensor (HO2S) signal, No signal | ECM-1A* |
| P0141 | Rear heated oxygen sensor (HO2S) preheating, Faulty signal | ECM-1C |
| P0171 | Long-term fuel trim, Lean | ECM-25* |
| P0172 | Long-term fuel trim, Rich | ECM-25* |
| P0201 | Injector 1, No signal | ECM-1E* |
| P0202 | Injector 2, No signal | ECM-1F* |
| P0203 | Injector 3, No signal | ECM-20* |
| P0204 | Injector 4, No signal | ECM-21* |
| P0231 | System relay control signal, Signal too low | ECM-24* |
| P0232 | System relay control signal, Signal too high | ECM-24* |
| P0234 | Boost pressure, Signal too high | ECM-2E* |
| P0236 | Boost pressure sensor, Signal too high | ECM-AD* |
| P0236 | Boost pressure sensor, Signal too low | ECM-AD* |
| P0237 | Boost pressure sensor, Signal too low | ECM-AC* |
| P0238 | Boost pressure sensor, Signal too high | ECM-AC* |
| P0243 | Turbocharger (TC) control valve signal, No signal | ECM-2D |
| P0245 | Turbocharger (TC) control valve signal, Signal too low | ECM-2D |
| P0246 | Turbocharger (TC) control valve signal, Signal too high | ECM-2D |
| P0261 | Injector 1, Signal too low | ECM-1E* |
| P0262 | Injector 1, Signal too high | ECM-1E* |
| P0264 | Injector 2, Signal too low | ECM-1F* |
| P0265 | Injector 2, Signal too high | ECM-1F* |
| P0267 | Injector 3, Signal too low | ECM-20* |
| P0268 | Injector 3, Signal too high | ECM-20* |
| P0270 | Injector 4, Signal too low | ECM-21* |
| P0271 | Injector 4, Signal too high | ECM-21* |
| P0300 | Misfire, Emission level, Faulty signal | ECM-44 |
| P0300 | Misfire, Emission level, Faulty signal | ECM-45 |
| P0300 | Misfiring damaging to the three-way catalytic converter (TWC), Faulty signal | ECM-4D |
| P0324 | Control module, Internal fault | ECM-43 |
| P0326 | Knock sensor (KS), Faulty signal | ECM-41 |
| P0335 | Engine speed (RPM) sensor, No signal | ECM-78* |
| P0336 | Engine speed (RPM) sensor, Faulty signal | ECM-78* |
| P0340 | Camshaft position (CMP) sensor signal, No signal | ECM-32* |
| P0341 | Camshaft position (CMP) sensor signal, Faulty signal | ECM-32* |
| P0351 | Ignition coil 1, Signal too high | ECM-38* |
| P0351 | Ignition coil 1, Signal too low | ECM-38 |
| P0352 | Ignition coil 2, Signal too high | ECM-38* |
| P0352 | Ignition coil 2, Signal too low | ECM-38* |
| P0420 | Three-way catalytic converter (TWC) efficiency, Faulty signal | ECM-5A |
| P0441 | Leak diagnostic, Faulty signal | ECM-6A* |
| P0442 | Leak diagnostic, Major leak | ECM-68* |
| P0443 | Canister purge (CP) valve signal, Signal too high | ECM-5C* |
| P0444 | Canister purge (CP) valve signal, No signal | ECM-5C* |
| P0445 | Canister purge (CP) valve signal, Signal too low | ECM-5C* |
| P0455 | Leak diagnostic, Fuel tank filler cap missing | ECM-68* |
| P0456 | Leak diagnostic, Minor leak | ECM-68* |
| P0480 | Engine cooling fan (FC) low-speed, Signal too high | ECM-85 |
| P0480 | Engine cooling fan (FC) low-speed, Signal too low | ECM-85 |
| P0481 | Engine cooling fan (FC) high-speed, Signal too high | ECM-87 |
| P0481 | Engine cooling fan (FC) high-speed, Signal too low | ECM-87 |
| P0500 | Speedometer signal, Faulty signal | ECM-6F* |
| P0505 | Idle air control (IAC) valve, No signal | ECM-8A* |
| P0506 | Idle speed, Signal too low | ECM-8D |
| P0507 | Idle speed, Signal too high | ECM-8D |
| P0508 | Idle air control (IAC) valve, Signal too low | ECM-8A* |
| P0509 | Idle air control (IAC) valve, Signal too high | ECM-8A* |
| P0513 | Communication fault, Immobilizer, Incorrect VIN | ECM-9B |
| P0533 | Air conditioning (A/C) pressure sensor, Signal too high | ECM-6B |
| P0533 | Air conditioning (A/C) pressure sensor, Signal too low | ECM-6B |
| P0560 | System relay output, Signal too high | ECM-A3* |
| P0562 | System relay output, Signal too low | ECM-A3* |
| P0600 | Communication, transmission control module (TCM), Faulty signal | ECM-DC |
| P0600 | Communication, transmission control module (TCM), Faulty signal | ECM-DD |
| P0600 | Communication, transmission control module (TCM), Faulty signal | ECM-DE |
| P0600 | Communication, transmission control module (TCM), Faulty signal | ECM-E0 |
| P0603 | Control module, Internal fault | ECM-9D |
| P0604 | Control module, Internal fault | ECM-9D |
| P0605 | Control module, Internal fault | ECM-9D |
| P0646 | Air conditioning (A/C) relay signal, Signal too low | ECM-7D |
| P0647 | Air conditioning (A/C) relay signal, Signal too high | ECM-7D |
| P0650 | Malfunction indicator lamp (MIL), Signal too high | ECM-7F |
| P0650 | Malfunction indicator lamp (MIL), Signal too low | ECM-7F |
| P0650 | Malfunction indicator lamp (MIL), No signal | ECM-7F |
| P0700 | Diagnostic trouble code (DTC) in the automatic transmission control module (TCM) | ECM-76* |
| P1014 | Camshaft reset valve, Incorrect signal | ECM-62* |
| P1236 | Boost pressure, Signal too low | ECM-2E* |
| P1336 | Engine speed (RPM) sensor, Sporadic | ECM-53 |
| P1440 | Leak diagnostic, Signal too low | ECM-66* |
| P1446 | Leak diagnostic pump, Signal too high | ECM-AF* |
| P1446 | Leak diagnostic pump, Signal too low | ECM-AF* |
| P1446 | Leak diagnostic pump, No signal | ECM-AF* |
| P1449 | Leak diagnostic, Signal too high | ECM-65* |
| P1449 | Leak diagnostic, Signal too low | ECM-65* |
| P1449 | Leak diagnostic, Faulty signal | ECM-65* |
| P1482 | Air conditioning (A/C) condenser fan, Signal too high | ECM-82 |
| P1482 | Air conditioning (A/C) condenser fan, Signal too low | ECM-82 |
| P1482 | Air conditioning (A/C) condenser fan, No signal | ECM-82 |
| P1513 | Communication fault, Immobilizer, No communication | ECM-9A |
| P1600 | DSA signal cable, Signal too high | ECM-70 |
| P1600 | DSA signal cable, Signal too low | ECM-70 |
| P1600 | DSA signal cable, Faulty signal | ECM-70 |
| P1600 | Torque reduction, No signal | ECM-91 |
| P1600 | Torque reduction, Faulty signal | ECM-91 |
| P1600 | Torque reduction, Diagnostic trouble code (DTC) in the DSA | ECM-91 |
| P1600 | Torque reduction, Initiation fault | ECM-91 |
*) Activates malfunction indicator lamp (MIL).