Checking the response code

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition on.
  Fig 2: Identifying Scan Tool

  Courtesy of VOLVO CARS OF NORTH AMERICA.
  • Activate the Scan Tool (ST) in MODE 2.
  • Set the switch to the OFF position.
  • Depress the brake pedal.
  • Check that the stop (brake) lamp switch is OK by checking whether response code 1-3-2 is obtained.
  Fig 3: Programming Cruise Control

  Courtesy of VOLVO CARS OF NORTH AMERICA.

  Is response code 1-3-2 obtained?

  1. Yes, response code 1-3-2 is obtained. Troubleshooting has been completed.
  2. No, response code 1-3-2 is not obtained. Refer to Checking the stop (brake) lamp .
  3. No, response code 3-1-1 is obtained instead. Refer to Checking response code 3-1-1 .

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Connecting Connector

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off.
• Connect the stop (brake) lamp switch
• Connect the Volvo Scan Tool (ST) to the data link connector (DLC).
• Ignition on.
  Fig 3: Identifying Scan Tool

  Courtesy of VOLVO CARS OF NORTH AMERICA.
  • Activate the Scan Tool (ST) in MODE 2.
  • Set the switch to the OFF position.
  • Depress the brake pedal.
  • Check whether response code 1-3-2 is obtained.
  Fig 4: Braking Several Times To Stop

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Is response code 1-3-2 obtained? 

• YES 

  OKAY:  Troubleshooting has been completed.

• NO 

  Refer to Replacing the component