Checking the cable between the selector switch and the control module

Fig 1: Identifying Ignition OFF

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Disconnecting Connector

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 3: Disconnecting Control Unit

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off.
• Control module disconnected.
• Disconnect the selector switch.

  Connect an ohmmeter between selector switch connector terminal #3 and control module connector terminal #6.

  Fig 4: Identifying Control Module 14-Pin Connector And Selector Switch 5-Pin Connector

  Courtesy of VOLVO CARS OF NORTH AMERICA.
  Fig 5: Identifying Ohmmeter

  Courtesy of VOLVO CARS OF NORTH AMERICA.

The ohmmeter should read approximately 0 Ω. 

• OK 

  Refer to Checking the control module connectors 

• NOT OK 

  Refer to Checking for an open-circuit